Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Residential Locksmith Across Parkway
If you’re locked out, need a lock changed, or want your Parkway home’s entry hardware upgraded, we can usually have a technician at your door within the hour. Dunmore Locksmith handles the full range of Residential Locksmith work in Parkway: rekeying, deadbolt installation, lockout entry, door reinforcement, and window lock upgrades. Our dispatchers answer the phone live around the clock at (910) 714-4287, so you’ll never sit through a voicemail tree while your front door refuses to latch. We know this neighborhood’s housing stock well, and we’ll tell you straight whether the old hardware on a 1970s ranch house can be saved or needs to go.
Why Dunmore Locksmith Is Parkway’s Preferred Residential Locksmith Company
Parkway homeowners tend to call us with a specific set of problems, and we’ve gotten very good at fixing them without overselling. The single-story tract homes that dominate this area were mostly built in the 1970s and 1980s, and many still carry their original builder-grade Kwikset knob-and-deadbolt sets. That hardware is often worth rekeying rather than replacing, and we’ll tell you when it isn’t. We’re part of the Threshold Group network, which has been serving California homeowners since 2007, and every technician we send to Parkway is background-checked, identity-verified, and photo-badged. You’ll know the tech’s name and see their photo before they ring the bell.
We answer our own phones at (910) 714-4287. A live person, not a call service, every time. That matters at 2 a.m. when the deadbolt won’t throw and the door won’t stay shut. It also matters during a Parkway summer afternoon when the frame has swelled shut and the key turns but the bolt won’t move. Local knowledge means we arrive already suspecting the frame, not the lock, and we bring the right tools for that diagnosis.
Lost Key Replacement in Parkway
Lost Key Replacement in Parkway usually means one of two situations: you lost the only set of keys to the house, or you’ve had keys go missing and you don’t know who might have them. In either case, the solution is a rekey, not necessarily a new lock. We rekey the existing cylinders, changing the internal pins so every old key goes dead on the spot. For a typical Parkway single-cylinder deadbolt and knob combo, rekeying runs $65 – $120 for the first lock and $15 – $30 per additional lock keyed alike. If you want new keys cut at the same time, they’re a few dollars each.
Rekeying vs. Replacing Hardware
If the lock itself still turns smoothly and the bolt seats properly once the door frame is adjusted, there’s no reason to replace it. Rekeying takes under twenty minutes per lock and keeps your existing hardware. If the cylinder is worn enough that the key wiggles or hangs, replacement makes more sense. New Kwikset or Schlage deadbolts installed in Parkway typically run $85 – $180 per door, parts and labor included.
House Key Locksmith in Parkway
House Key Locksmith in Parkway covers everything from cutting a spare set of keys to diagnosing why a key won’t turn in a lock that worked fine last week. A lot of calls on the older Florin Road corridor streets involve worn key-ways in original 1970s Kwikset knobs. Tenants force them, the pins and tumbler wear faster, and eventually the key snaps or the cylinder seizes. A simple key cut for a resident is $5 – $10. If the cylinder itself is worn, we can usually rekey it rather than replace the visible hardware, which keeps the door looking original while restoring clean key operation.
Rental Turnover Rekeys
Parkway has a substantial rental stock, and property owners here rekey far more often than their counterparts in single-family-only neighborhoods. When a tenant moves out, the lock must be rekeyed before the next moves in, California Civil Code 1941.3 requires functioning deadbolts on rental units anyway, and many older Parkway rentals don’t have a working one on the rear door. We handle turnover rekeys for landlords throughout the area, and we can key every door on the property to a single key for convenience.
Trusted Brands We Service in Parkway
We’re factory-authorized to install and service Schlage, Kwikset, and Medeco hardware, among others. That authorization matters on warranty claims and on high-security Medeco cylinders where key duplication requires a registered card. For Parkway customers, we keep common Kwikset and Schlage pins, springs, and deadbolt assemblies on the truck, so a spring replacement or cylinder rekey is usually a single visit. If your existing hardware is an Abloy or Medeco high-security format, we can order and install the correct cylinders, and we’ll match the finish to your existing trim.
Common Residential Locksmith Problems We See in Parkway Homes
- Seasonal deadbolt throw failure. Parkway summers push past 105°F for weeks at a time. Wood door frames swell until the bolt physically cannot travel into the strike plate. The lock isn’t broken; the frame is. The fix is usually a strike plate adjustment or a shallow chisel and shim, not a new deadbolt.
- Clay-soil frame racking. The Sacramento Valley’s adobe clay expands and contracts with wet and dry seasons. Over decades, that movement racks door frames out of square by a quarter inch or more. Latches miss strike plates, deadbolts drag, and doors won’t close flush. This is a Parkway-specific condition that coastal and foothill towns don’t see the same way.
- Worn original Kwikset cylinders from the 1970s. These locks were builder-grade when they went in, and they’re now decades past typical service life. Key-ways wallow out, keys stick, and a forced turn eventually snaps the key or breaks the tail-piece. We rekey far more of these than we replace, but we’ll tell you honestly when replacement is the smarter spend.
- Hollow-core doors and aluminum sliders with no real security. Many Parkway homes still have hollow-core exterior doors and aluminum-frame sliding-glass patio doors. A modern deadbolt bolted onto a thin hollow slab tears out under a single hard shove. That’s a door reinforcement problem, not a lock problem, and we address both.
Pricing for Residential Locksmith in Parkway, CA
Here are the actual numbers we quote for Parkway work. A standard lockout runs $75 – $145 during business hours. Rekeying a single knob lock is $65 – $120. Deadbolt installation runs $85 – $180 per door depending on the model and whether we’re reinforcing the frame at the same time. Window lock installation is $35 – $90 per window. Door reinforcement, including a steel strike plate and longer screws into the framing, runs $45 – $120 per door. The price we give on the phone is the price on the invoice. We don’t add a call-out charge when the tech arrives, and we don’t quote low to get a foot in the door. Call (910) 714-4287 for an exact quote, no obligation.
We Also Serve Cities Near Parkway
While this page is specific to Parkway, our technicians cover the broader region and regularly work in Residential Locksmith in Parkway and neighboring communities. If you’re just outside Parkway, in Los Angeles, San Diego, San Jose, or San Francisco, the same team and the same written-pricing policy apply. Dispatch is coordinated through our Sacramento area office, and response times to those areas run slightly longer than our Parkway callouts. Call (910) 714-4287 for an accurate ETA to your specific address.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Residential Locksmith in Parkway
In most Parkway homes, the deadbolt itself is fine. The wood door frame swells when Valley temperatures run past 105°F day after day, and the bolt physically can’t reach the strike plate. The correct fix is a strike plate adjustment or a shallow chisel and shim on the frame, costs around $60 – $100, and takes one visit. Call (910) 714-4287 and describe the symptom; we’ll tell you what we think before we dispatch.
If the original locks are intact and turn smoothly, rekey them. It’s the cheapest correct solution, runs $65 – $120 for the first lock, and gives you complete key control between tenants. If the cylinders are worn, sloppy, or broken, replacement is smarter, and a new Kwikset or Schlage deadbolt installed runs $85 – $180. We’ll give you a straight answer on the phone after a few questions.
Yes, in most cases. A mortise lock on a Parkway home from the 1970s or 1980s can usually be rekeyed as long as the mortise body and trim are intact, typically $85 – $150 depending on the cylinder. If the body is cracked or the internal springs are shot, replacement is the smarter spend, and we’ll tell you that directly. We stock common mortise replacement parts on the truck specifically for this housing stock.
It means we open the door with lock-picking tools and bypass techniques rather than drilling the cylinder. For most Parkway locks, including worn 1970s Kwikset knobs, non-destructive entry succeeds on the first visit, in under twenty minutes usually, for $75 – $145. We only drill when the cylinder is already too damaged to pick, and we’ll tell you before we do it, along with the cost of a replacement cylinder.
They absolutely can be. Hollow-core exterior doors tear out easily under force, and aluminum-frame sliders can be lifted out of their tracks if they aren’t fitted with anti-lift blocks or a secondary pin lock. We recommend reinforced strike plates and longer screws into the framing for any door that carries a deadbolt. That upgrade runs $45 – $120 per door and makes the difference between a lock that resists and one that tears out with the frame.
Every job we do in Parkway is covered by the 365-Day Done Right Promise. That means a written guarantee on the work, and if a repair fails within a year, we come back at no charge. If anyone arrives at your door who wasn’t named and pictured in the text we sent before the visit, that visit is free. Call (910) 714-4287 now for a free estimate, an ETA, and a straight answer.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Parkway and the surrounding Sacramento County communities.