Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Change Door Locks Across Parkway
Changing door locks in Parkway is not a one-size-fits-all job, and most of the calls we take from this part of Sacramento County come down to two seasonal problems: frames that swell shut in 105°F heat, and builder-grade hardware from the 1970s and 1980s that has finally given out. We get to Parkway fast, usually within 30 to 45 minutes for standard calls, and the price you are quoted on the phone before we dispatch is the price on the invoice. That is a written commitment, not a sales line. Call us at (910) 714-4287 and a live person answers, day or night.
Why Dunmore Locksmith Is Parkway’s Preferred Change Door Locks Company
Parkway calls us because we treat a lock change as a security decision, not a parts swap. The houses here, mostly single-story ranch tract homes from the 1970s and 1980s, have specific failure patterns that a general handyman will miss. Wood frames move. Strikes drift. Deadbolts bind and fail to throw. We see those failures every June through September, and we also see the January calls when the same frames contract and latches stop catching their strike plates. Knowing which problem you have before we touch the door means we fix the cause, not just the symptom.
Every technician who comes to your Parkway home is background-checked and identity-verified under what we call The Threshold Standard. Before the visit, you receive the tech’s name and photo. At your door, they wear a clean marked uniform and show a photo ID badge. If someone shows up you were not told to expect, that visit is covered at no charge. Our owner, Perry Osgood, built this process because the person who turns the lock cylinder should be the person you were told to expect. The name Dunmore comes from old words for a great fort, a stronghold built to keep what is inside safe. That is the job.
Door Lock Installation in Parkway
Door lock installation in Parkway usually means replacing a worn knob-and-deadbolt set on a 1970s or 1980s ranch home with hardware that actually fits the door and the frame. When a deadbolt will not throw because the summer heat has swollen the frame, installing a new lock without adjusting or reinforcing the strike plate solves nothing. So we check the frame, the strike alignment, and the door’s fit before we choose hardware. In most Parkway homes, we spend as much time correcting frame alignment as we do installing the lock itself.
Full Deadbolt Replacement
A standard deadbolt replacement on a Parkway front door typically runs $145 to $260 including the hardware. That covers removing the old unit, boring or adjusting the hole if it has ovaled out over 40 years, setting a new ANSI Grade 1 or Grade 2 deadbolt, and test-throwing it through a full open-close cycle. If the frame is badly swollen, we may need to reposition the strike plate, which adds to the labor but is often the only way the deadbolt throws fully in August.
Hardware Swap After a Security Event
If keys are missing, a tenant has moved out, or a contractor kept a copy, a full lock change rather than a rekey is the right call. We sit down with you on the phone first, tell you the flat price for the hardware and labor, and no work starts until you approve that number in writing. No surprise totals at the end.
Patio Door Lock Change in Parkway
Patio door lock change in Parkway is a steady source of work for us because so many homes here still have aluminum-frame sliding-glass doors from the original build. Aluminum flexes. The door sags half an inch, the latch no longer lines up with the receiver, and one day the door stops locking at all. Or the original thumb-turn lock seizes from corrosion and decades of dust. We diagnose the misalignment before we change the hardware, because a new lock on a sagging door will fail the same way within a season.
Sliding Glass Door Lock Replacement
We replace and upgrade the primary thumb-turn and keyed locks on sliding doors, and we also add a secondary foot-operated lock or pin-style lock for the side that rarely opens. A typical sliding-glass lock replacement on a Parkway home runs $120 to $230 depending on whether we are swapping like-for-like or adding a second locking point. For renters on the older streets off the Florin Road corridor, this is one of the fastest ways to bring a patio door into compliance with California’s deadbolt and security-code expectations.
Frame and Strike Realignment
If the sliding door has racked out of square from the Valley’s clay-soil movement, changing the lock alone will not make the door secure. We adjust the rollers, shim or reposition the receiver, and only then fit the new lock. This is a Parkway-specific situation, not a generic patio-door issue, and it is why the fix has to be done by someone who has seen these frames move through a full Sacramento Valley year.
Trusted Brands We Service in Parkway
We install and service Schlage, Kwikset, and Medeco hardware every week in Parkway, and we keep common cylinders, strike plates, and mounting hardware stocked in our service vehicles. That means a same-day lock change does not become a two-day job while parts get ordered. We are factory-authorized on these lines and we fit the right grade to the door. For a Parkway rental that still has the original 1970s Kwikset and a worn key-way, we will often recommend a Schlage B560 deadbolt or similar ANSI Grade 1 unit instead of another builder-grade replacement. You get a better bolt, a stronger strike, and hardware that survives the seasonal frame movement this area throws at it.
Common Change Door Locks Problems We See in Parkway Homes
- Deadbolt will not throw in summer heat. When temperatures pass 105°F, wood frames expand enough that the bolt no longer lines up with the strike plate. That is the top Parkway lock call from June through September.
- Latch misses the strike plate in wet winters. Clay soils swell with winter rain, frames rack slightly, and the latch sits a quarter-inch off. The door feels closed but the lock is not actually engaged.
- Builder-grade Kwikset hardware from the 1970s and 1980s. Worn key-ways bind, pins stick, and keys snap off in the cylinder. Many Florin Road corridor rentals still carry this original hardware through tenant turnover after tenant turnover.
- Sliding-glass patio doors that no longer lock. Aluminum frames flex and sag, pulling the latch out of the receiver. This is one of the most common security gaps we close on Parkway ranch homes.
Pricing for Change Door Locks in Parkway, CA
Here is what a lock change in Parkway actually costs. A standard single-cylinder deadbolt replacement runs $145 to $260 including hardware. A knob-and-deadbolt combo change runs $180 to $340. A sliding-glass patio door lock replacement runs $120 to $230, and adding a secondary locking point runs toward the top of that range. A rekey of a standard knob or deadbolt (changing the internal pins so your old keys no longer work) typically runs $65 to $110 per cylinder. The exact number depends on the hardware grade and how much frame correction the door needs. You get the full price in writing on the phone before anyone is dispatched, and there is no call-out surcharge added when the tech arrives. Call us at (910) 714-4287 for a free estimate.
We Also Serve Cities Near Parkway
Our Change Door Locks team works across the Sacramento County metro area, so when we are not in Parkway, we are often routing calls through Parkway, Los Angeles, San Diego, San Jose, and San Francisco. Same written pricing, same named-tech arrival standard, same 365-day guarantee on every job. If you have a rental property in one of those cities, the process is identical: call, get your quote, know exactly who is coming to the door.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Change Door Locks in Parkway
When Sacramento Valley temperatures push past 105°F, the wood door frame around your deadbolt expands enough that the bolt no longer lines up with the strike plate. The fix is usually a strike-plate repositioning or frame adjustment, not a new lock. Call (910) 714-4287 and we will tell you over the phone which one your door likely needs, then confirm it on site before any work starts.
If the key-way is worn, the cylinder binds, or the deadbolt is the original builder-grade unit from the 1970s or 1980s, replace it. A rekey changes the pins but does not fix a worn cylinder or a weak bolt. We will quote you both options in writing on the phone, tell you the price difference, and let you choose. Estimates are free at (910) 714-4287.
California Civil Code 1941.3 requires a functioning deadbolt on each main swinging entry door of a dwelling unit. Many Parkway landlords do not realize this until a tenant turns over. If you own a rental in Parkway, we can do a compliance check across all exterior doors and quote any corrections in one written price before work begins.
Yes. We replace the primary thumb-turn or keyed lock, and we can add a secondary pin or foot lock for the stationary panel. If the door has sagged out of square from clay-soil movement, we also adjust the rollers and realign the receiver so the new lock actually engages. A typical Parkway patio door lock change runs $120 to $230. Call (910) 714-4287 for a firm quote.
Most locks in Parkway do not need to be drilled. If you have a key, we remove the lock normally. Drilling is only a last resort for a seized cylinder or a snapped key, and we tell you before we do it. The full price is quoted on the phone before anyone is dispatched, and it is the price on the invoice. Call (910) 714-4287 for an exact quote.
Call Dunmore Locksmith for Change Door Locks in Parkway
We have seen the lock problems Parkway houses throw at people: frames swelling in summer, gaps opening in winter, and 40-year-old Kwikset hardware that gives out at the worst possible moment. Our technician is sent to you by name and photo before the visit, the price is in writing before work starts, and every job is covered by the 365-Day Done Right Promise. If it is not done right, we return at no charge. That is a written guarantee stamped on every job. Call us today at (910) 714-4287 and a live person will answer, 24 hours a day, 7 days a week, 365 days a year.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Parkway and the surrounding Sacramento County area.