Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Locksmith in Lomita, CA
A locksmith in Lomita deals with a very specific kind of hardware failure: corrosion. The city’s two-square-mile footprint sits close enough to San Pedro Bay that salt-laden marine air works on door locks year-round, and much of the housing stock dates from the 1940s through 1960s, before Lomita even incorporated. That means original locksets with worn keyways, seized cylinders, and frozen deadbolts are the norm here, not the exception. If you need a residential locksmith, door lock repair, a lock change, or commercial work, call Dunmore Locksmith at (910) 714-4287.
Why Lomita Homes Are Different
Lomita is a small, landlocked residential city just a few miles from the Port of Los Angeles. Prevailing onshore winds push salt-bearing air directly across the city, and that air does not stay outside. It works into cylinder pins, tailpieces, strike plates, and every brass or zinc component in a door lock. We regularly pull deadbolt cylinders in Lomita where the pins have corroded and fused to the plug, a direct result of decades of harbor air on hardware that was never built for coastal exposure.
The housing stock compounds the problem. Most homes here went up in the 1940s through 1960s as single-family builds, and a surprising number still carry their original or first-replacement locksets. These are often worn, non-standard keyways that were never upgraded by long-term homeowners. Along Narbonne Avenue and in the residential streets near the Lomita Railroad Museum, we see the same pattern repeatedly: original 1960s deadbolts with corroded internals, frozen exterior padlocks, and latches that no longer seat properly. That is why a lock change or deadbolt upgrade in Lomita is more often a hardware replacement than a simple adjustment.
Our Main Lomita Services
Most calls we take in Lomita split into two groups: homeowners who need a residential locksmith for a door that will not open or close properly, and property owners who need locks changed after a move, a tenant turnover, or a lost key. Here is what each service involves in this city.
Residential Locksmith in Lomita
Residential work in Lomita usually starts with a door that has stopped cooperating: a key that will not turn, a deadbolt that has seized, or a latch that no longer lines up with the strike plate. Given the salt air and the age of most locksets here, we approach every call expecting some degree of corrosion. You will know exactly who is coming to your door before you open it, because every technician is sent to you by name and photo, and carries a photo ID badge. Learn what a Residential Locksmith in Lomita visit includes.

Door Lock Repair in Lomita
Door lock repair in Lomita is rarely as simple as tightening a screw. The salt-bearing marine air oxidizes internal components faster than manufacturer ratings assume, which means a lock that worked fine six months ago can seize without warning. We diagnose the actual failure, repair what can be repaired, and recommend replacement only when the hardware has reached the end of its useful life. Every repair carries our 365-Day Done Right Promise in writing. See what Door Lock Repair in Lomita covers.

Change Door Locks in Lomita
Changing door locks in a city where original 1960s hardware is still common means deciding between a simple cylinder swap and a full lockset replacement. If the existing hardware is solid, we can change the cylinder and rekey it so old keys no longer work. If the lock body itself has corroded or the keyway is worn beyond reliable use, a full replacement is the honest recommendation. We quote the full price in writing before any work starts. Read about how we Change Door Locks in Lomita.

Commercial Locksmith in Lomita
Commercial properties in Lomita, mostly small retail and office spaces along the city’s main corridors, need locks that hold up under salt air and daily use. We handle master key systems, high-security cylinders, storefront door hardware, and rekeying after staff changes or tenant moves. Commercial jobs are surveyed and scheduled, with a written scope and a flat per-lock price before we begin. Find out what a Commercial Locksmith in Lomita job involves.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lomita
We work on Schlage, Kwikset, and Medeco hardware every week in Lomita. Because original residential locksets here are so often worn or corroded, we keep common Schlage and Kwikset pins, cylinders, and replacement parts stocked for same-day jobs, which means most lock repairs are finished on the first visit. See our brands for the full list.
Pricing for Locksmith in Lomita, CA
These are the typical ranges we quote for common jobs in Lomita. The price you are quoted on the phone is the price on the invoice.
| Service | Typical range in Lomita |
|---|---|
| Rekey a standard knob lock | $65 – $95 |
| Rekey a deadbolt | $65 – $95 |
| Rekey both knob and deadbolt on one door | $110 – $160 |
| Replace a standard knob lock | $90 – $160 |
| Replace a deadbolt | $90 – $160 |
| Change a full lockset (knob + deadbolt) | $180 – $310 |
| Repair a stuck or seized lock | $95 – $180 |
| Commercial rekey per cylinder | $35 – $65 |
What pushes a jobsite to the top of that range in Lomita is usually corrosion. A cylinder with fused pins takes longer to extract, and a lockset that has been absorbing salt air since the 1960s may need cutting rather than standard removal. You will get the full price in writing before we start, with no surprise totals at the end.
Neighborhoods We Serve in Lomita
We cover the full city. Lomita is only about two square miles, and most of it is single-family residential, which means our technicians are usually on-site within 30 to 45 minutes for standard calls.
- The area around the Lomita Railroad Museum
- Narbonne Avenue corridor
- Lomita Boulevard residential streets
- Eshelman Avenue neighborhoods
- Western Avenue area
Service Area – Cities Near Lomita
While this page covers Lomita specifically, our technicians are scheduled across the South Bay. If you are in a neighboring city, you can read the dedicated pages for Lakewood, CA, Torrance, CA, Carson, CA, and Rancho Palos Verdes, CA.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Locksmith in Lomita
For most residential calls we are on-site within 30 to 45 minutes. Lomita is about two square miles, and our technicians work locally across the South Bay, so travel time is short. Emergencies like lockouts are prioritized, and phones are answered by a live person 24 hours a day at (910) 714-4287.
No. Changing or rekeying a lock on a single-family home does not require a permit in Lomita. Commercial properties may have fire or building code requirements depending on the specific hardware and occupancy, and we will flag that during the written scope if it applies.
Yes. The price goes in writing before any work starts, and that written quote is the price on the invoice. There is no call-out surcharge added on arrival and no estimate that balloons after the work begins. Call (910) 714-4287 for a free estimate on any lock job in Lomita.
What happens when you call
- 1A real person answersNo phone trees - talk to a local locksmith pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lomita Customers Say
"Good work installing a keypad lock on our back office. Showed up fifteen minutes late, but he called first. Programming codes took a while, but he made sure I understood it."
- Mitchell K."Deadbolt on the front door was sticking and wouldn't throw all the way. He cleaned it, adjusted the strike plate, and it works smoothly now. Charged very little."
- Victor S."The fact that he was background checked and carried ID made me comfortable letting him into the home. Changed out two worn deadbolts for new grade 1 ones."
- Brenda Z.






