Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Door Lock Repair Across Burbank
Door lock repair in Burbank typically costs $95 – $240 for common fixes like a seized deadbolt or a misaligned strike plate, and most jobs are completed in a single visit. We’re Dunmore Locksmith, and our techs know the 1940s Rancho bungalows, the Magnolia Park ranchers, and the studio-corridor apartments along Olive and Alameda as well as any local. If your key won’t turn, your deadbolt spins loosely, or a broken key is lodged in a cylinder, call (910) 714-4287 and a live person answers, day or night.
Why Dunmore Locksmith Is Burbank’s Preferred Door Lock Repair Company
Burbank isn’t a side stop for us. It’s one of our core service areas, and our Door Lock Repair crews are in these neighborhoods every week. We know that a deadbolt that worked fine in June can bind hard by mid-July, and we don’t waste your time drilling a cylinder when the real problem is a swollen wood frame. Customers across Burbank keep our number because we tell them the truth about what’s actually wrong, write the price down before touching a screwdriver, and stand behind the repair for a full year.
Dunmore Locksmith has operated under the Threshold Group umbrella since 2007, and every job carries the 365-Day Done Right Promise: if the repair fails within a year, we return at no charge. That’s a written guarantee, not a handshake. Our technicians are background-checked, identity-verified, uniformed, and sent to you by name and photo before the visit. When the knock comes, you already know exactly who is on the other side of the door.
Perry Osgood, who leads Dunmore Locksmith, set the standard we work under: you should never have to open your door to a stranger you weren’t told to expect. That’s the Threshold Standard, and we’ve applied it to every Burbank service call since day one.
Broken Key Extractor in Burbank
Broken key extractor work in Burbank is one of the most common calls we get from rental turnover near the studio corridors and from older homes where original Kwikset and Schlage cylinders have seen decades of use. When a key snaps off in the cylinder, it’s usually because the metal has fatigued from years of turning against a slightly misaligned lock, not because the key was forced. Our techs remove the broken piece without damaging the cylinder, then test the lock itself so you don’t get the same failure a month later.
Why Keys Snap in Older Burbank Locks
The pin-tumbler hardware in many 1940s – 1960s Burbank homes is still original, which means the internal springs and pins are as old as the house. When they wear, the key meets resistance partway through the turn. That resistance is metal fatigue at work. A key that’s been subtly bending every day for years eventually gives out, usually halfway into the deadbolt.
Extraction Without Drilling
Most broken key extractions in Burbank we handle without drilling. If the key is protruding even slightly, we can grip and pull it. If it’s flush or recessed, we use a spiral extractor that slides along the keyway and backs the broken piece out. Drilling is a last resort and only happens with your written approval, after we’ve shown you the cost on paper.
Expect broken key extraction in Burbank to run $85 – $160 depending on the cylinder type and how deep the break is.
Sliding Door Lock Repair in Burbank
Sliding door lock repair in Burbank gets a lot of play in homes with patios, and especially in the rental stock along Olive Avenue and Alameda where aluminum sliders are standard. These locks fail two ways: the hook latch won’t catch because the door has sagged on its rollers, or the internal mechanism has worn smooth from years of sliding open and shut. Both are fixable without replacing the whole door, and most sliding door lock repairs in Burbank run $95 – $210.
Roller Sag and Latch Misalignment
A sliding door that’s dropped even an eighth of an inch will sit too low for the lock’s hook to enter the keeper. The door itself is usually fine. We adjust the rollers, realign the lock, and test the latch so the door actually secures, not just looks closed.
Worn Internal Mechanisms
When a sliding door lock feels loose or the key turns without resistance, the internal gearing is usually worn out. On older Burbank sliders, replacement cylinders are often still available for Kwikset and Schlage-compatible hardware. On some studio-era buildings, we swap in a modern retrofit lock that fits the existing cutout, so you keep the door but gain a lock that actually works.
Trusted Brands We Service in Burbank
We’re factory-authorized on Schlage, Kwikset, Medeco, and Yale hardware, and because we stock common cylinders, pins, and strike plates on our service vehicles, most Door Lock Repair in Burbank jobs are finished in one trip. That matters when your front deadbolt is seized on a 105-degree July afternoon and you need the door working before the heat pushes through the house. A Kwikset deadbolt on a Magnolia Park rancher gets the same careful hand as a Medeco high-security cylinder on a production office near the Warner Bros. lot.
Common Door Lock Repair Problems We See in Burbank Homes
- Seasonal deadbolt seizures from June through September. Inland Valley heat swells wood door frames, and a deadbolt that turned smoothly in spring can bind hard by August. Usually the lock’s internal pins are fine; the frame is the problem. We realign the strike plate and stop this from repeating.
- Strike-plate drift on 1940s – 1960s bungalows. Rancho and Magnolia Park homes sit on decades-old foundations that settle. When the door frame shifts out of plumb, the bolt no longer enters the strike plate cleanly. You’ll feel it as a “sticky” deadbolt or a door that needs a shoulder shove to lock.
- Studio-corridor rental turnover keeps locksmiths busy. Apartments along Olive Avenue and Alameda cycle through tenants on short production contracts. Property managers call us to rekey units multiple times a year, often on the same doors, and we keep records so repeat work is faster each time.
- Mismatched locks on acreage properties. Detached workshops, gates, and outbuildings around Burbank frequently have a different, cheaper cylinder than the house. Owners don’t realize it until a rekey leaves them carrying two keys for what should be one property. We key everything alike in a single visit.
Pricing for Door Lock Repair in Burbank, CA
Here are the honest numbers for Burbank. Standard deadbolt repair or strike-plate realignment runs $95 – $160. Broken key extraction costs $85 – $160. Sliding door lock repair is $95 – $210. Rekeying a standard knob or deadbolt starts around $35 – $60 per cylinder and goes up for Medeco or restricted-key hardware. The price we quote on the phone is the price on the invoice. No bolt-ons, no call-out surcharge added at the door. If we need to replace hardware, we show you the cost on paper before a single tool comes out. Call (910) 714-4287 and we’ll give you an exact range for your lock before anyone is dispatched. Estimates are free.
We Also Serve Cities Near Burbank
If you’re just outside Burbank, we cover the surrounding area too. Our crews regularly run to Glendale, West Hollywood, Altadena, and Beverly Hills for the same written-price, 365-day-backed Burbank service. Whether it’s a rekey near Griffith Park or a lock repair up in the hills, the crew arrives named, badged, and ready.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Lock Repair in Burbank
In Burbank, about half the time it’s the door, not the lock. When a deadbolt’s thumb-turn spins without moving the bolt, the tailpiece inside the cylinder has usually stripped. But when the bolt won’t throw because it’s jamming against the strike plate, the real problem is usually a warped wood frame from Valley summer heat or decades of foundation settle. We diagnose both on-site and don’t replace a lock that isn’t broken. Call (910) 714-4287 and we’ll tell you which one you have.
Yes. Our Burbank service vehicles stock Kwikset, Schlage, and Yale cylinders plus pin kits for most common keyways, so we can rekey the house, the detached garage, and a gate all in the same visit. If your workshop has an odd off-brand cylinder, we’ll tell you before we leave and bring the right part back. Full price is quoted before we start, and it’s the price on the invoice.
In most cases, yes. If the key is protruding at all, we can grip and extract it without touching the door. If it’s snapped flush or recessed, we use a spiral extractor that works along the keyway. Cutting or drilling the lock is only done with your written approval, after we’ve shown you the replacement cost. Call (910) 714-4287 for a free estimate before you try to dig it out yourself, which often pushes the broken piece deeper.
It can be, but only if the door frame is stable. Many 1940s – 1960s Burbank homes have frames that shift seasonally with heat and foundation settle, and a smart lock’s motorized bolt has less tolerance for misalignment than a manual deadbolt. We can advise honestly whether your door is a good candidate, and if it is, we install smart locks from brands we trust, including Schlage and Yale. The consultation is free, and if a smart lock isn’t right for your frame, we’ll say so plainly.
Yes, and it’s what we recommend for every unit turnover in Burbank, not just for security but for liability. You can’t verify how many copies of an old key are floating around. A standard rekey runs $35 – $60 per cylinder, which is far less than a lock replacement and takes about 15 minutes per lock. We work with property managers along Olive and Alameda on recurring turnover schedules and keep records so each rekey is faster. Call (910) 714-4287 and we’ll quote your unit count over the phone.
Call Dunmore Locksmith for Door Lock Repair in Burbank, CA
When a lock fails, you need someone who shows up when they say they will, who you already know by name and face, and who writes the price down before touching the door. That’s how we work in Burbank. We’re available 24 hours a day, every day of the year, and a real person answers the phone, not a menu. Call (910) 714-4287 now for a free estimate. The tech who arrives is the one we told you to expect, badge in hand, and the job is covered in writing for 365 days.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Burbank and the San Fernando Valley as part of the Threshold Group since 2007.