Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Commercial Locksmith Across Mira Monte
Commercial locksmith work in Mira Monte runs $95 – $260 for most jobs, with master key systems and access control starting around $400 – $1,200 depending on door count. We get to most Mira Monte parcels within 45 – 60 minutes, and the price you’re quoted on the phone at (910) 714-4287 is the price on the invoice. No bait pricing, no arrival surcharge. Mira Monte is unincorporated Ventura County, which means no city PD and longer emergency response times. That reality shapes how we approach every job here: heavier deadbolts, keyed-alike systems across outbuildings, and locks you can actually verify from a distance.
Perry Osgood leads our team, and every technician arrives in a marked uniform with a photo ID badge, sent to you by name and photo before the visit. If someone shows up you weren’t told to expect, you don’t open the door. That’s the Threshold Standard, and it’s been in place since 2007 as part of the Threshold Group family of independent local locksmith businesses.
Why Dunmore Locksmith Is Mira Monte’s Preferred Commercial Locksmith Company
Mira Monte parcels are different from commercial work in Ventura or Oxnard. A single address here often covers a house, a detached workshop, a barn, and two gated ag-access drives spread across hilly acreage. Urban locksmiths treat that as four separate service calls. We treat it as one property, one visit, one keyring.
Our Commercial Locksmith crew carries Medeco, Mul-T-Lock, Abloy, Schlage, and Kwikset cylinders in the van because the hardware across this valley is a patchwork. A 2019 rebuild with a Schlage Encode smart deadbolt can sit next to a 1960s ranch still running original Kwikset pin-and-tumbler hardware on the same road off Grand Avenue. You shouldn’t need a second locksmith because the first one didn’t stock a mortise lock body. We stock them.
Every job is covered by the 365-Day Done Right Promise. It’s a written guarantee on every repair. If the repair fails, we return at no charge. That’s not a vague satisfaction pledge. It’s stamped on the work order.
Mortise Lock Replacement in Mira Monte
Mortise Lock Replacement in Mira Monte typically runs $180 – $340 per door, and it’s the most common call we get on the older ranch and hillside stock that survived the 2017 Thomas Fire. A mortise lock is the rectangular lock body that slides into a pocket cut into the door edge, not the round bored cylinder you see on newer hardware. Homes built in the 1950s through 1970s across Mira Monte often have original mortise lock bodies that are worn past rekeying. The latch no longer retracts cleanly or the deadbolt won’t throw, and at that point replacement is cheaper than nursing a 60-year-old mechanism along.
When the same block has a post-fire rebuild with modern cylindrical hardware, one technician has to be able to move between both worlds in the same visit. We can pull an antique mortise body from a 1962 ranch door, match the finish to hardware the homeowner wants to keep, and still be ready for the smart lock on the 2019 build next door.
When Rekeying Won’t Save It
Some Mira Monte mortise locks can be rekeyed for $35 – $65. But if the lock body is cracked, the spindle is stripping, or the deadbolt won’t fully throw, rekeying just buys you a few months. We’ll tell you plainly which one you’re looking at before any work starts, with the price in writing.
Matching Period Hardware on Rebuilds
Owners rebuilding after the Thomas Fire sometimes want the new door to match the original hardware on the untouched outbuilding. We keep mortise lock bodies in common finishes so a 2023 door doesn’t look like it belongs to a different property than the 1968 barn forty feet away.
Replace Commercial Door Lock in Mira Monte
Replace Commercial Door Lock in Mira Monte runs $120 – $280 per door for standard commercial-grade hardware, with high-security cylinders from Medeco or Mul-T-Lock pushing that to $180 – $350. The job covers removing the old lock, prepping the door, installing the new lock body and cylinder, and cutting keys. On a property with a detached shop and a gate, we’ll quote the whole parcel at once so you’re not surprised by a fourth lock halfway through the visit.
A lot of Mira Monte outbuildings still run Kwikset or Schlage residential-grade locks that were never built for daily commercial use. The springs wear, the tailpiece loosens, and eventually the key stops turning under load. We replace those with ANSI Grade 1 commercial hardware when it makes sense, or a solid residential upgrade when it doesn’t. The recommendation depends on how the building is actually used, not on a catalog.
Gate Locks and Hasp Replacement
Driveway gates and shared ag-access gates are the bread and butter no urban locksmith sees at this volume. A rusted hasp and a padlock left by a departing caretaker are common first calls after a Mira Monte property changes hands. We replace the hasp, cut the old padlock, and key the new one to match the house so you’re not adding another key to the ring.
One Keyring for the Whole Parcel
If you’re carrying a house key, a shop key, and two different gate keys, that’s a key control problem waiting to happen. Especially on a Very High Fire Hazard Severity Zone parcel where an evacuation means grabbing one keyring in a hurry. We’ll key everything alike in a single visit.
Trusted Brands We Service in Mira Monte
We’re factory-authorized to install and service Schlage, Medeco, Mul-T-Lock, Abloy, Baldwin, Yale, and Kwikset hardware. For Mira Monte customers, that means we stock the cylinders and mortise lock bodies that actually appear on this valley’s doors: Medeco and Mul-T-Lock for high-security commercial needs, Kwikset and Schlage for the surviving ranch stock and the post-fire rebuilds, Yale and Baldwin for period hardware. You won’t wait three days for a part to ship from a warehouse. It’s in the van.
Common Commercial Locksmith Problems We See in Mira Monte Homes
- Post-Thomas Fire rebuilds with factory-set smart locks. A 2019 or 2020 rebuild spec’d a Schlage Encode or similar smart deadbolt during construction, but nobody ever changed the default programming or added the owner as the primary user. We set up proper user codes and remove the installer defaults in about an hour.
- Antique mortise hardware on surviving ranch stock. The 1950s – 70s homes that made it through the fire often still run original mortise lock bodies. Techs who don’t carry those parts end up drilling entry holes that shouldn’t exist. We do clean, non-destructive entry and rekey the existing body.
- Gate padlocks and hasps rusted solid. The Ojai Valley’s hot summers and dry winds don’t rust everything, but a padlock on an exposed driveway gate takes direct sun and Santa Ana dust year-round. These fail at inconvenient times, and they’re usually the last lock anyone thinks about until it won’t open.
- Multi-building parcels keyed to different keys. House, shop, barn, and gate all on separate keys because a previous locksmith quoted the job as a single-address stop. The owner ends up fumbling a four-key ring during an evacuation. We consolidate the entire parcel to one key in one visit.
Pricing for Commercial Locksmith in Mira Monte, CA
A standard commercial lockout in Mira Monte runs $95 – $160. Rekeying a single commercial lock runs $35 – $65 per cylinder, and a full parcel rekey with house, shop, and two gates is typically $180 – $320 all in. Mortise lock replacement runs $180 – $340 per door. Replace commercial door lock with ANSI Grade 1 hardware runs $120 – $280, or $180 – $350 with high-security Medeco or Mul-T-Lock cylinders. Master key systems start around $400 for small multi-door setups and climb with door count and cylinder type. Access control and keypad entry systems run $600 – $2,500 depending on the hardware and whether we’re wiring a gate or just programming a smart deadbolt.
Call (910) 714-4287 for an exact quote. It’s free, it’s in writing before any work starts, and there’s no call-out surcharge added when the technician arrives. What Perry Osgood quotes you on the phone is what appears on the invoice.
We Also Serve Cities Near Mira Monte
Beyond Mira Monte, our technicians cover commercial locksmith work in Los Angeles, San Diego, San Jose, and San Francisco. Same written pricing, same Threshold Standard vetting, same 365-Day Done Right Promise wherever the job takes us.
Serving Mira Monte, CA - Our Local Coverage Area
We’re based in the Mira Monte area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Commercial Locksmith in Mira Monte
Yes. We quote the whole parcel as one job, not as separate addresses. A typical Mira Monte property with a house, one outbuilding, and two gates takes 2 – 3 hours to key alike, and it runs $180 – $320 depending on lock count and cylinder type. Call (910) 714-4287 for a written quote before we dispatch.
Yes. We carry both modern smart-lock hardware and mortise lock bodies for the older ranch stock, so one technician handles a Schlage Encode on the rebuild and a Kwikset pin-and-tumbler cylinder on the 1960s original in the same visit. You won’t need two separate companies or two trips.
Rarely. Most commercial lockouts in Mira Monte open with non-destructive entry using picks, bypass tools, or shims, which is faster and cheaper than drilling. Drilling becomes necessary only when the lock is damaged, frozen, or a high-security cylinder won’t respond to anything else. We’ll tell you before we drill, and the price doesn’t change from the quote.
Yes, if you have a Wi-Fi or keypad lock you can check and lock it from your phone, assuming the device still has battery and connectivity. For traditional keyed locks, call us at (910) 714-4287 and we’ll send a technician to verify the property is secure and rekey anything that needs it. This is a common call in Mira Monte’s Very High Fire Hazard Severity Zone.
We stock Medeco, Mul-T-Lock, and Abloy high-security cylinders, Schlage and Kwikset commercial-grade deadbolts and levers, mortise lock bodies for older ranch hardware, and heavy-duty gate hasps and padlocks. If your outbuilding or gate needs something specific, we’ll confirm the hardware is in the van before we head out.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Mira Monte and the surrounding Ojai Valley.