Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Change Door Locks Across Banning
If you need to Change Door Locks in Banning, expect to pay roughly $95 – $180 for a standard knob or deadbolt swap on an existing door, and $120 – $260 when the job includes rekeying the new hardware to match your existing keys. Most homes in Banning get same-day service, and we quote the full price in writing before any technician rolls out. Call (910) 714-4287 and a live person answers, any hour, every day.
Banning’s older housing stock and the San Gorgonio Pass wind corridor create lock problems you won’t find in Beaumont or Palm Springs. We know the difference between a lock that needs cleaning and a lock that needs replacing, and we’ll tell you straight which one you’re looking at.
Why Dunmore Locksmith Is Banning’s Preferred Change Door Locks Company
Banning homeowners call us for one reason more than any other: they want to know who is standing at their door before they unlock it. Every Dunmore technician is background-checked and identity-verified under The Threshold Standard, and you get their name and photo sent to you before arrival. When they show up in a marked uniform with a photo ID badge, you’re not guessing. That matters in a city where older residents and parents with young kids make up a big share of the homeowner base.
We have served customers as part of the Threshold Group family since 2007, and Banning’s specific challenges are familiar ground for our crews. We stock the hardware and specialty parts that Banning’s 1950s tract homes and manufactured-home communities actually require. Our dispatchers coordinate from the brand’s Inland Empire office, so response times to Banning neighborhoods are short. Every repair carries our 365-Day Done Right Promise: if the repair fails, we return at no charge. Written guarantee stamped on the job, not a vague pledge.
Perry Osgood, who leads our team, has built the business around one rule: the price goes in writing before any work starts, and that written price is the price on the invoice. No call-out surcharge added at the door, no totals that balloon after the fact.
Patio Door Lock Change in Banning
Patio Door Lock Change in Banning is a common spring and summer request, when sliding glass doors that were ignored through the windy winter finally refuse to latch. The job means removing the old handle set or mortise lock from the patio door, replacing it with a new keyed lock, and adjusting the latch and strike so the door seats correctly in its track. In Banning, grit from the Pass works into the latch mechanism of sliding doors faster than most homeowners expect, so we clean and lubricate the track and the lock body as part of the replacement. Price for a standard patio door lock change in Banning runs $110 – $210, depending on whether it’s a surface-mount handle set or a mortise-style lock.
Sliding Door Handle and Latch Replacement
Many Banning homes have aluminum-frame sliding doors from the 1970s and 1980s with proprietary handle sets that big-box stores don’t stock. We carry replacement hardware that matches those older frame profiles. The repair is usually done in under an hour, and all work is covered by the 365-Day Done Right Promise.
Keyed Patio Door Upgrade
Some Banning patio doors still exit with only a thumb latch and no keyed lock. Installing a keyed cylinder adds a real security barrier and lets you use one key for both your front entry and patio door. We key the patio lock to match your existing house key, so you don’t carry an extra key.
Door Lock Change in Banning
Door Lock Change in Banning typically means swapping out a worn or failed knob set or deadbolt for new hardware, and it costs $95 – $180 for most standard residential doors. If the new lock needs to be rekeyed to match your existing key, that adds $25 – $45 per cylinder. Banning’s wind and freeze cycle shortens the life of cheap lock cylinders, so we recommend replacing builder-grade hardware with a Schlage or Kwikset unit that has better internal pin tolerances and a finish that holds up to the grit.
Knob-Only Entry Set Replacement
West-side Banning homes built in the 1950s and 1960s often still have a single knob with no deadbolt. Replacing that knob with a modern keyed entry knob plus a new ANSI Grade 1 deadbolt is a real security upgrade, and it’s a job we do often. The cost runs $160 – $280 for both pieces installed and keyed alike.
Mortise Lock Change on Older Doors
Some of Banning’s older stick-built homes have mortise locks with rectangular lock bodies recessed into the door edge. These aren’t a simple swap. In many cases the original mortise lock can be cleaned, rekeyed, and kept in service. If the body is cracked or the internals are stripped, we replace it with a modern mortise cassette from Schlage or Yale, and the installation requires precise chisel work to fit the new body into the old pocket. That job typically runs $210 – $350.
Trusted Brands We Service in Banning
We are factory-authorized for work on Schlage, Kwikset, Medeco, and Yale hardware, which covers the majority of locks in Banning homes. We keep Banning-specific parts on the truck: mortise cassettes for 1950s doors, surface-mount handle sets for older patio sliders, and replacement cylinders for the oddball locks found on manufactured homes. That means we don’t have to run back to a supply house when a 1962 door has a cylinder size that no longer appears in standard catalogs. If you have a Medeco high-security cylinder, we can rekey or replace it and cut new restricted keys on site.
Common Change Door Locks Problems We See in Banning Homes
- Grit-fouled cylinders. Wind off the San Gorgonio Pass drives fine desert dust into lock cylinders, where it mixes with old lubricant and turns into paste. Keys drag, then stick, then won’t turn at all. The lock usually isn’t worn out; it just needs deep cleaning and a rekey.
- Frozen locks in winter. Banning’s ~2,400-foot elevation means hard overnight freezes that low-desert cities never see. Moisture inside a lock body freezes, and the cylinder won’t turn until de-iced. This is a routine winter call in Banning manufactured-home parks.
- Deadbolts that bind or won’t throw. Freeze-thaw cycles rack door frames out of alignment, especially on older wood-frame homes. The deadbolt goes halfway and stops. This is a mechanical adjustment issue, not a lock replacement issue, and we fix it by adjusting the strike and the bore.
- Proprietary mobile-home hardware. Manufactured homes in Banning often use non-standard lock bodies that aren’t sold at hardware stores. We stock the common brands and can special-order uncommon ones, usually within a day or two.
Pricing for Change Door Locks in Banning, CA
Here’s what Banning homeowners can expect to pay. A standard knob or deadbolt change runs $95 – $180. Rekeying an existing lock costs $25 – $45 per cylinder. A patio door lock change runs $110 – $210. Upgrading a knob-only entry to a knob plus deadbolt runs $160 – $280. A mortise lock replacement on an older door runs $210 – $350. What changes the price: whether the new hardware needs to be keyed alike, whether the door frame needs realignment, and whether we’re dealing with non-standard hardware that requires a stocked specialty part. You’ll get the full written price on the phone before anyone is dispatched, and that number is the number on your invoice. No call-out surcharge on arrival, ever.
We Also Serve Cities Near Banning
Our crews regularly handle Change Door Locks in Banning and the surrounding communities, including Beaumont, Calimesa, San Jacinto, and Yucaipa. If you’re in one of those cities and need a lock changed or a cylinder rekeyed, call the same number and you’ll get the same written-price commitment and the same 365-day guarantee.
Serving Banning, CA - Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Change Door Locks in Banning
Most of the time, just a rekey and a deep clean. Wind-driven grit from the San Gorgonio Pass packs into the cylinder and fouls the pins, which makes the key drag. We disassemble the cylinder, clean out the grit, replace the pins, and cut new keys. That costs $25 – $45 per cylinder. If the cylinder body is cracked or the plug is worn out from years of grit, replacement is the honest call, and we’ll tell you before we do any work. Call (910) 714-4287 for an exact quote.
In most cases we can rekey an original mortise lock and keep it working for years. The lock body on a 1950s Banning home is usually solid brass or steel, and the internals hold up well once cleaned. If the cylinder is proprietary or the body is cracked, replacement is the better move, and we carry Schlage and Yale mortise cassettes that fit the original pocket. Estimates are free.
It’s usually the frame, not the lock. Banning’s freeze-thaw cycle racks wood door frames out of square, so the deadbolt no longer lines up with the strike plate. We realign the strike, adjust the bore if needed, and the deadbolt throws cleanly. If the lock itself is damaged from forced operation, we’ll quote a replacement in writing before touching anything.
Yes. Banning has a substantial share of manufactured and mobile homes, and we keep the common proprietary lock bodies and cylinder formats on the truck. Hard overnight freezes flex metal door frames on these homes and bind the deadbolt, so a stocked part plus a frame adjustment is often the real fix. If we need a specialty order, it’s usually in hand within a day or two.
Yes, and this is one of the most common upgrades we do on Banning’s west-side stick-built homes. We bore the second hole for the deadbolt, install the new hardware, and adjust the strike so the deadbolt seats square even on a door that has warped over decades of wind and temperature swings. The job runs $160 – $280 for a knob plus deadbolt set keyed alike. Call (910) 714-4287 and we’ll quote it before we dispatch.
On a 1958 stick-built just off West Ramsey Street, we found exactly the situation a lot of Banning homeowners live with: an original knob-only entry with no deadbolt, and a door frame that had racked out of alignment from years of freeze-and-thaw. The deadbolt the homeowner wanted wouldn’t throw fully in the warped frame. We deep-cleaned the grit-packed cylinder, rekeyed the existing knob set, then added a reinforced strike and adjusted the bore so the new deadbolt seated square. The family kept their original door and hardware. That’s what change door locks work in Banning often looks like: a rekey plus a mechanical adjustment, not a hardware swap. The key is knowing which one you need.
If you need a lock changed, a cylinder rekeyed, or a patio door lock replaced in Banning, call (910) 714-4287. A live person answers 24/7. You’ll get the written price before anyone is dispatched, the name and photo of your technician before they arrive, and every repair covered by our 365-Day Done Right Promise.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Banning and the San Gorgonio Pass since 2007.