Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Kwikset Locksmith in Glendale, CA | Dunmore Locksmith
We provide independent Kwikset service across Glendale, from Adams Hill Craftsman bungalows to Brand Boulevard corridor apartments. The one thing that makes our Kwikset work here different is the city’s unusual split: century-old mortise conversions in the foothills and high-turnover smart-lock installs in dense rentals, often on the same day’s route. Call (910) 714-4287 for a free estimate with a written price before any work starts.
Why Glendale Residents Choose Us for Kwikset Service
Perry Osgood grew up in the Palms neighborhood of Los Angeles, a few blocks west of Culver City, where he spent enough time watching his uncle re-key apartment buildings to know this trade was more about trust than tools. He completed his locksmithing coursework at Los Angeles Trade-Technical College on Washington Boulevard, then spent the next two-plus decades working locks across the city. Today he runs Dunmore Locksmith on a simple rule: every job gets a written price before anyone touches a door, and every technician who goes out is someone Perry would send to his own mother’s house.
We’ve serviced Kwikset locks across Glendale’s rental and hillside housing stock since before smart locks existed, and we still keep OEM Kwikset pin kits and cylinder rebuild parts on every truck. We’re not affiliated with Kwikset – we’re just deeply familiar with what fails on their residential lines in this specific city. Our Kwikset sales & service covers everything from 1920s mortise conversions to current electronic deadbolts, with the Threshold Standard on every call: background-checked, identity-verified technicians sent to you by name and photo before the visit, photo ID badge shown at the door. If anyone arrives who you weren’t told to expect, that visit is covered at no charge. Our Glendale service area includes the full sweep from Chevy Chase Canyon down through the Brand Boulevard corridor.
Common Kwikset Locksmith Problems We Solve in Glendale
- SmartCode 916 and Kevo pairing failures after battery drain. Very common in Brand Boulevard-corridor apartments where tenants rotate frequently and no one re-pairs the Z-Wave or Bluetooth. We factory-reset, re-pair to the hub, and show the new tenant how to check battery level before the next turnover.
- 660/665 deadbolt bolts binding against strike plates. The Verdugo Mountains funnel Santa Ana winds that desiccate 1920s – 1940s wood door frames in Adams Hill and the lower foothills. The frame shrinks, the jamb shifts, and the bolt misses or sticks. We shim, re-align, or install extended-throw deadbolts sized for aged jambs rather than selling you a whole new door.
- Pin-tumbler cylinders wearing until keys stick or pull out mid-turn. Heavy tenant turnover in Glendale’s 1960s – 1980s apartment buildings means keys get duplicated on worn cutting wheels until the original Kwikset Tustin, Cove, or Polo cylinder is too sloppy to hold tolerance. We replace with fresh OEM cylinders cut on our truck.
- Electronic deadbolts loosening in oversized mortise conversions. Spanish Revival homes on original Fir framing sometimes got a Kwikset SmartCode or 660 installed where a mortise lock lived. The bore is too large, the bolt wobbles, and the mounting screws strip over time. We sleeve the bore or install a reinforced strike box.
- Keyed-alike commercial cylinders failing in multi-generational family properties. Along San Fernando Road and Central Avenue, family-owned shops and mixed-use buildings often run Kwikset commercial cylinders keyed alike for convenience. When one fails or a tenant changes, the whole system needs rekeying without breaking the owner’s long-time master key. We match existing KW1 masters on-site.
Kwikset Service in Glendale: What Local Conditions Mean for Your Equipment
Glendale’s Armenian-American community – commonly cited at roughly 40% of the city’s population – drives a disproportionate share of Kwikset work along San Fernando Road and Central Avenue, where multi-generational family properties and ethnic-market storefronts often run Kwikset keyed-alike commercial cylinders because they’re affordable and locally stocked at Glendale hardware suppliers. That referral-and-stocking pattern is a Glendale-specific Kwikset ecosystem that simply doesn’t show up the same way in Burbank or Pasadena. We’ve built relationships in that network over years of showing up on time, naming our technician before the visit, and quoting in writing. The result is a steady flow of calls from property owners who need same-day rekeying across multiple units or storefronts, all keyed to an existing master that dates back to the original family purchase. We carry the KW1 and KW9 blanks, the commercial-grade cylinders, and the master-pin kits to do it without ordering parts.
Kwikset Models & Products We Service in Glendale
We stock OEM Kwikset pin kits, KW1 and KW9 key blanks, and genuine replacement cylinders on every Glendale truck. Our Kwikset sales & service covers the full residential and light-commercial line:
- Kwikset Kevo (1st and 2nd gen) – still common in Glendale apartment and condo smart-lock installs; we handle battery, pairing, and touchpad calibration issues
- SmartCode 913/914/916 keypad deadbolts – full electronic diagnostics, code recovery, and Z-Wave re-pairing
- Tustin / Cove / Polo residential knob and deadbolt lines – rekeying, cylinder replacement, and latch repair
- 660 / 665 single-cylinder deadbolt – the standard builder-grade unit in older Glendale rentals; we rebuild, rekey, or replace with OEM parts
We use quality aftermarket parts only when OEM is unavailable and the customer agrees. For older 660/665 bodies in solid condition we rebuild or rekey. For weathered exterior SmartCode units with moisture-damaged boards, we recommend replacement rather than chasing intermittent electronics.
Kwikset Service Pricing in Glendale
Rekeying a standard Kwikset knob or deadbolt in Glendale typically runs $29 – $49 per cylinder. Full Kwikset deadbolt installation, including bore prep and strike alignment, usually falls between $149 – $229 depending on door condition and hardware grade. Smart lock installation or electronic troubleshooting for SmartCode and Kevo units ranges $129 – $199, with code recovery or Z-Wave pairing at the lower end and full replacement at the upper.
What drives cost: door prep condition (aged Fir framing in Spanish Revival homes takes longer), cylinder count for keyed-alike systems, and whether we need to sleeve an oversized mortise conversion. Every price goes in writing before any work starts. No call-out surcharge gets added on arrival. The quote you get on the phone is the price on the invoice. Call (910) 714-4287 for an exact quote – estimates are free.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Glendale
Yes. We carry both blanks on every truck, cut to factory spec on calibrated duplicators. Most Adams Hill and Chevy Chase Canyon jobs finish in one visit. Call (910) 714-4287 to confirm stock for your specific keyway – estimates are free.
No. Rekeying changes the physical pin-tumbler cylinder, which is separate from the electronic keypad programming. However, we can document your current codes before service and walk you through re-entering them, or set new ones if you prefer. Call (910) 714-4287 to schedule – we’ll confirm the process before dispatch.
The Verdugo Mountains intensify Santa Ana winds that desiccate wooden door frames on hillside properties. The frame contracts, the jamb shifts, and the bolt no longer aligns with the strike. This is a recurring autumn pattern specific to Glendale’s foothill geography. We shim the strike, adjust the jamb, or install an extended-throw deadbolt sized for the aged opening. Call (910) 714-4287 – we can usually fix this in one visit without door replacement.
Yes. We’ve installed and serviced both in corridor apartments and condo conversions. We also train tenants on battery checks and hub pairing to reduce repeat calls. For property managers, we quote flat per-unit pricing with written scope. Call (910) 714-4287 for a building-wide estimate.
No. Dunmore Locksmith is an independent Kwikset service provider, not manufacturer-affiliated or authorized. We source OEM parts through standard locksmith supply channels and stand behind our work with the 365-Day Done Right Promise: covered for 365 days – if the repair fails, we return at no charge.
Service Areas Near Glendale
We serve customers throughout the Glendale area and travel regularly to Kwikset service in Ontario, Los Angeles proper, and Kwikset service in Elk Grove for scheduled commercial work. Same-day service is typically available across the San Fernando Valley corridor and into downtown Los Angeles.
Book Your Kwikset Service in Glendale Today
A locked door should only stop the wrong person. Whether your Kwikset is binding in an Adams Hill Craftsman or dropping codes in a Brand Boulevard rental, we’ll quote a written price before dispatch and send a named, photo-verified technician to your door. Same-day service is available throughout Glendale. Call (910) 714-4287 now for your free estimate.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Glendale since 2007.