Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Door Lock Repair Across Old Fig Garden
Door lock repair in Old Fig Garden usually costs between $85 and $240 for common fixes like sticky latches, misaligned striker plates, and worn cylinders. If you’re dealing with a pre-WWII mortise lock that binds in summer heat or a deadbolt that won’t throw, we can typically have a technician at your door within the hour. Call (910) 714-4287 and you’ll get a live person, not a voicemail, no matter what time it is.
Old Fig Garden is not a typical Fresno neighborhood, and its doors aren’t typical either. The homes here were built between 1910 and 1945, and many still have their original solid-wood entry doors with cast-iron mortise lock cases. That changes how repair work gets done, which is why we carry period-matched parts and send technicians who understand the difference between a hardware failure and a security problem. The crew serving Old Fig Garden is dispatched from our Fresno, Central Valley office, so we’re close enough to reach Van Ness Boulevard, the streets off Rialto, and the lanes near Figarden Drive without delay.
Key Takeaways: Door Lock Repair in Old Fig Garden
- Most repairs run $85 – $240, with the full price written down before any work starts.
- We reach Old Fig Garden homes fast, usually within the hour, with live-person phone coverage 24/7.
- Original 1920s – 30s mortise locks need antique-hardware sourcing, not a quick deadbolt swap.
- Every repair is covered by the 365-Day Done Right Promise in writing.
- You’ll know your technician’s name and face before they arrive. They’ll show a photo ID at the door.
Why Dunmore Locksmith Is Old Fig Garden’s Preferred Door Lock Repair Company
Homeowners in Old Fig Garden don’t want a stranger at the door who can’t explain what’s wrong with a 1930s Yale mortise cylinder. They want someone who has actually repaired one before. Our technicians carry replacement cast-iron mortise cases and period-matched cylinders from Schlage, Yale, and Kwikset, along with the specialty parts sourced from antique-hardware dealers that this neighborhood’s homes require. That’s not a skill set most Fresno locksmiths develop, because the newer subdivisions east of Highway 41 don’t have this hardware.
We’ve been part of the Threshold Group since 2007, and every technician we send to Old Fig Garden works under what we call The Threshold Standard: background-checked, identity-verified, uniformed, and carrying a photo ID badge they’ll show at the door before you let them inside. You get their name and photo before the visit, so the person who arrives is exactly who you were told to expect. If someone shows up who you weren’t told about, that visit is on us at no charge.
Perry Osgood, who leads Dunmore Locksmith, put it plainly: the name Dunmore comes from old words for a great fort, a stronghold built to keep what’s inside safe. That’s the idea behind every repair we do in Old Fig Garden, from a simple rekey to a full mortise lock restoration. We don’t rush a job on a 1928 Spanish Colonial Revival door just to get to the next call.
Sliding Door Lock Repair in Old Fig Garden
Sliding Door Lock Repair in Old Fig Garden typically runs $95 to $195, depending on whether the lock is a simple spring-loaded latch on an aluminum patio slider or a mortise-style lock set into a French door. Many of the estate homes here have original wood-framed sliding doors on sunrooms and rear entries, and the hardware on those is often decades old and no longer manufactured.
Seasonal Issues on Patio Sliders
Through the San Joaquin Valley summers, when Old Fig Garden regularly sees stretches above 105°F, wood door frames swell and throw patio sliders out of alignment. The latch no longer lines up with the keeper, so the door won’t lock. In older homes, the fix usually involves re-setting the track and adjusting the keeper, not replacing the whole assembly.
Antique and French Sliders
For a French door with a mortise lock, we’ll source a period-matched replacement rather than routing out the stile for a modern latch. That preserves the original millwork and keeps the door looking the way it did in 1935. If you’re not sure whether your slider lock is repairable, call us and describe the hardware; we’ll tell you what’s realistic before we ever send a truck.
Deadbolt Repair in Old Fig Garden
Deadbolt Repair in Old Fig Garden runs $75 to $165 for most single-cylinder deadbolts on modern doors, and $120 to $240 when the work involves a mortise-style deadbolt integrated into an original entry door. Older homes here often have a thumb latch that operates the deadbolt from inside, and when that mechanism fails, the door can end up stuck ajar or impossible to lock.
When a Deadbolt Won’t Throw
The usual cause in this neighborhood is seasonal swelling: the thick old-growth wood door expands in July and August heat, so the bolt no longer lines up with the strike plate. A technician who doesn’t know the local pattern might drill out the cylinder and sell you a new deadbolt that still won’t throw. We check alignment first, adjust the striker plate, and only replace hardware when it’s genuinely worn out.
Cracked Lock Cases
We were called to a 1928 Spanish Colonial Revival on Van Ness Boulevard where the original cast-iron mortise lock case had cracked at the hub. The thumb latch wouldn’t throw the deadbolt and the door was stuck ajar. Our tech carried a period-matched Yale mortise cylinder and replacement cases from an antique-hardware dealer. We used non-destructive entry to free the swollen door, re-pinned the cylinder, and adjusted the striker plate so the original brass escutcheon stayed untouched. The homeowner kept her period hardware and got a working lock back. That’s the kind of repair this neighborhood asks for, and it’s the kind we came prepared to do.
Trusted Brands We Service in Old Fig Garden
We’re factory-authorized to install and service Schlage, Kwikset, and Medeco hardware, and we stock common parts for those brands on our service vehicles so Old Fig Garden customers aren’t waiting on a distributor order. For the older homes, we also keep period-matched Yale mortise cylinders and can source Abloy high-security cylinders when the job calls for it. Whether it’s a Kwikset deadbolt on a rear door or a Schlage on a converted estate entrance, the repair gets done with factory parts, not generics. That matters when a copied key is a building-wide problem and you need restricted-key control.
Common Door Lock Repair Problems We See in Old Fig Garden Homes
- Summer swelling and latch binding. Original solid-wood doors expand through the 105°F+ valley heat, so the mortise latch misaligns with the striker plate. A tech who misreads this as a worn cylinder will over-drill and ruin a door that’s survived since 1930.
- Cracked cast-iron mortise cases. The 1920s – 30s lock bodies in these homes weren’t designed to flex with a shifting door frame. When they crack, replacement parts have to come from specialty antique-hardware dealers because no Fresno distributor stocks them.
- Keyway wear on original cylinders. After 80 or 90 years, the brass pins inside a cylinder wear down, so keys stick, turn hard, or snap off in the lock. Re-pinning is usually the answer, not replacing the hardware.
- Multi-tenant key control on estate conversions. Several of the grand old homes on Van Ness and Rialto have been split into apartments, and residents losing keys is a recurring problem. A master key system with restricted keys means one lost key doesn’t force a property-wide rekey.
Pricing for Door Lock Repair in Old Fig Garden, CA
A standard lock repair visit in Old Fig Garden runs $85 to $240, with most jobs landing between $120 and $180. Rekeying a standard knob lock typically runs $50 to $90. Sliding door lock repair runs $95 to $195 and deadbolt repair runs $75 to $165 on a modern door or $120 to $240 on a mortise-style entry. The written quote you get on the phone is the price on the invoice, and there’s no call-out surcharge added on arrival. Before you open the door for anyone, you’ll know exactly what the job will cost. Call (910) 714-4287 for a free estimate, and we’ll put the number in writing before any work begins.
We Also Serve Cities Near Old Fig Garden
While this page covers Door Lock Repair in Old Fig Garden, our technicians travel to nearby cities for the same written-price, guaranteed work. We serve Los Angeles, San Diego, San Jose, and San Francisco for scheduled jobs and urgent repairs. If you’re outside Old Fig Garden, our Door Lock Repair team can still help with the same 365-Day Done Right Promise.
Serving Old Fig Garden, CA - Our Local Coverage Area
We’re based in the Old Fig Garden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Lock Repair in Old Fig Garden
Yes, in nearly all cases we repair the existing lock rather than replacing it. Summer binding happens because the old-growth wood door swells in the extreme heat and pushes the latch out of alignment with the strike plate. We adjust the striker plate, re-align the door if needed, and lubricate or replace the internal parts only if they’re actually worn. We never swap original mortise hardware for a modern deadbolt unless you want us to, because routing out the stile damages a door that’s part of the home’s character. Call (910) 714-4287 and describe your door; we’ll tell you what’s likely before we arrive.
A restricted master key system is the right solution for estate conversions in Old Fig Garden. Each resident gets a key that only opens their unit and common entry doors, and that key can’t be copied at a hardware store, so the landlord controls every duplicate. When someone loses a key, you rekey a single cylinder rather than the whole property. We can set this up while keeping the original mortise hardware intact. Call us to scope the building; we’ll give you a written per-lock price before any work starts.
No. Drilling is the last resort, and on antique doors in this neighborhood it’s rarely necessary. We use non-destructive entry methods like bypass tools and shims to get doors open without damaging the wood or the hardware. On a 1920s mortise lock, a tech who knows the mechanism can often trip the latch from the outside without leaving a mark. If non-destructive entry fails, we’ll tell you before drilling, and we’ll be the ones who know how to source a replacement case rather than just filing out the door.
It depends on the crack. Hairline cracks at the screw tabs can often be stabilized and re-threaded, but a case that’s cracked at the hub usually needs a replacement case. We source period-matched cast-iron cases from specialty antique-hardware dealers, not Fresno distributors, so the repair may take a day or two while the part ships. The original brass escutcheon, the ornate plate behind the knob, can almost always be kept. Call us with the door’s details and we’ll tell you which situation you’re in before anyone sets foot on your property.
Yes, in most cases we can retrofit a smart lock onto the existing mortise lock without routing new holes in the door. We use a conversion cylinder or a slim-profile smart deadbolt installed above the mortise lock, so the original escutcheon and mechanical hardware stay in place. The door’s millwork doesn’t get cut, and if you ever want to return to a fully mechanical lock, the door is unchanged. We’ll give you a written price for the retrofit before we bring the hardware out. Call (910) 714-4287 for an exact quote.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Old Fig Garden as part of the Threshold Group since 2007.






