Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Commercial Locksmith Across Auburn
Commercial locksmith work in Auburn rarely looks like it does down in the valley. A storefront on Lincoln Way with an 1880s mortise lock, a workshop off Dry Creek Road with three outbuildings on different keys, a medical office near the Placer County Government Center that needs a panic bar meeting fire code before Friday’s inspection. We handle all of it. Dunmore Locksmith has crews serving Auburn every day, and we answer the phone with a live person 24 hours a day. Call us at (910) 714-4287 and a real dispatcher will give you a written price before anyone gets in a truck.
Why Dunmore Locksmith Is Auburn’s Preferred Commercial Locksmith Company
Auburn business owners call us because the alternative is usually a technician from Sacramento or Roseville who has never touched an original rim lock and quotes three separate trips for one property. We know the difference between a 1950s ranch office near Fulweiler Avenue and a National Register building on Commercial Street, and we stock hardware for both.
Perry Osgood, who leads our team, has spent enough time in Old Town Auburn to know that drilling out a seized mortise lock is the wrong answer in a building where the original door is worth more than the service call. Our technicians arrive in marked vehicles, show photo ID at the door, and carry the written estimate with them. You know who is coming before you open the door. That is the Auburn standard we have held since 2007 under the Threshold Group umbrella.
Every job carries the 365-Day Done Right Promise in writing. If a repair fails within a year, we come back at no charge. Not a vague satisfaction pledge. A written guarantee stamped on the invoice.
Replace Commercial Door Lock in Auburn
Replace Commercial Door Lock work in Auburn spans two very different worlds: the pre-1900 hardware in Old Town storefronts and the mid-century and newer locks on offices, clinics, and warehouses along Highway 49 and Interstate 80 corridors. A standard commercial lever or deadbolt replacement on a modern door typically runs $145 to $260, including the new hardware and labor. When the existing lock is an original mortise set from the 1880s, the job is different: we source compatible antique or reproduction parts so the door and lock stay intact rather than drilling through a piece of Auburn history that cannot be replaced.
Commercial deadbolts and levers
For most offices, retail spaces, and professional suites in Auburn, replacing a worn commercial lock is a straightforward job: remove the old deadbolt or lever, install a Grade 1 or Grade 2 commercial unit from Schlage or Kwikset, and verify alignment. In foothill properties where summer heat warps wooden door frames, we check the strike plate alignment every time. A deadbolt that was perfectly set at 70 degrees can bind badly after a week of 100-degree heat. That small check prevents the “the lock worked yesterday” call two months later.
Restoring original hardware instead of replacing it
If you are in Old Town Auburn and your storefront still carries its original rim lock or skeleton-key hardware, drilling is the lazy answer and we will not do it. We disassemble carefully, clean the internal mechanism, replace worn springs or levers with period-compatible parts, and reinstall. The lock works again and the building keeps its character. This takes longer and costs more, typically $220 to $380 depending on condition, but the alternative means a patched door and a lost piece of the building’s 1850s or 1880s identity. Our Commercial Locksmith team carries reproduction parts specific to Gold Country hardware.
Panic Bar Installation in Auburn
Panic Bar Installation in Auburn is most common for daycares, clinics, retail stores, and office suites that need to pass fire marshal inspection or meet occupancy requirements. A standard rim-type panic bar on a single commercial door in Auburn runs $380 to $620 installed, including the bar, mounting hardware, and labor. Vertical rod bars for double doors run $550 to $850. Auburn’s older commercial buildings, especially the converted Victorians in Old Town, sometimes require custom strike plates and door prep, which adds $60 to $140.
Code-compliant exits for Auburn commercial spaces
When a fire marshal requires panic hardware, the hardware needs to meet current California code for the occupancy type, not just whatever bar was cheapest at the hardware store. We install code-compliant panic bars from trusted manufacturers and verify the door swings in the correct direction, latches properly, and releases with the required pressure. Wooden doors on Auburn’s 1880s buildings frequently need reinforced stiles because the old wood cannot hold modern mounting screws without splitting. We do that reinforcement as part of the job, not as a surprise add-on.
Existing panic bar repair
Panic bars on high-traffic doors wear out. Dogging mechanisms fail, end caps come loose, the latch binds, and eventually a fire exit does not open when it needs to. We repair and replace panic hardware on Auburn commercial doors, including rerouting and realigning bars that have shifted out of position. This typically runs $95 to $180 plus parts. A bar that was hit by a cart or shoulder enough times will not seat properly, and the fix is usually faster and cheaper than waiting for a failed inspection.
Trusted Brands We Service in Auburn
We are factory-authorized to install and service Schlage, Medeco, and Kwikset hardware, along with Abloy, Mul-T-Lock, Baldwin, Yale, and Sargent. For Auburn businesses, that matters in two ways. First, we stock the pins, cylinders, and replacement parts at the Threshold Group bench that serves this area, so we do not need to order every part from Sacramento. Second, when your building has a Medeco high-security cylinder on the front door and Schlage levers on the interior doors, one technician can service all of it. No second vendor. No finger-pointing between manufacturers.
Common Commercial Locksmith Problems We See in Auburn Homes
Auburn’s housing stock and geography create specific failure modes that a Sacramento or Rocklin technician rarely encounters. Here is what we see most often on commercial and rural properties around Auburn:
- Ice-seized cylinders on outbuilding locks. Auburn sits at roughly 1,250 feet and gets hard freezes Sacramento never sees. Moisture inside an old pin-and-tumbler cylinder freezes solid, and a key that worked in November will not even insert in January. We carry de-icing lubricant and heating tools on every Auburn run.
- Summer heat warps wooden frames and knocks deadbolts out of alignment. The 105-degree dry heat that starts in June causes wooden doors and frames on foothill properties to expand and shift. A deadbolt or panic bar latch that was perfectly aligned in spring binds by August. Anyone quoting work without checking alignment is setting you up for a callback.
- Original pre-1900 mortise and rim locks misdiagnosed as “broken.” In Old Town Auburn, a skeleton-key lock that turns stiffly is not necessarily broken. It is usually clogged with 140 years of dust and dead grease. The wrong technician drills it. We restore it.
- Three keys and three invoices for one property. On multi-acre Auburn properties, owners are quoted a separate service call for the house, the workshop, the barn, and the gate. That is four trips, four minimum charges, and four keys. We rekey everything to one key in a single visit, and the price is set in writing before we start driving.
Pricing for Commercial Locksmith in Auburn, CA
We Also Serve Cities Near Auburn
Our Auburn crews regularly cover commercial jobs in Newcastle, Penryn, Colfax, and Lincoln. Properties along Highway 49 and Interstate 80 in either direction fall inside our regular service loop. If your business sits in any of those foothill towns and needs commercial lock work, call (910) 714-4287 and we will give you a written price over the phone.
Serving Auburn, CA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Commercial Locksmith in Auburn
Can you key all my Auburn outbuildings – workshop, barn, and gate – to one key in a single visit?
Yes. This is the most common request we get from Auburn property owners on multi-acre lots, and it is the single biggest money-saver we offer. We rekey every exterior cylinder across the property to one key in a single visit. Pricing covers the labor and the pins, not the number of buildings. A property with a house, workshop, barn, and gate typically runs $180 to $340 total. Call (910) 714-4287 for a written quote.
Do you carry parts for the original mortise locks and rim locks found in Old Town Auburn commercial buildings?
Yes. We keep a working inventory of reproduction and salvaged parts for pre-1900 mortise locks, rim locks, and skeleton-key hardware on buildings in Old Town Auburn. That includes springs, levers, strike plates, and cylinder blanks that match period hardware. We source what we do not stock, and we never drill out an original lock on a historic building unless the owner has specifically asked us to destroy it. That is a line we will not cross.
Why does my Auburn outbuilding lock freeze or stop turning every winter?
Auburn’s hard freezes, which Sacramento does not get, cause moisture inside older lock cylinders to freeze solid. The key will not insert or turn until the cylinder is thawed and the moisture is displaced. We address this by clearing old grease and corrosion from the cylinder and filling it with a low-temperature lubricant designed for foothill winters. That fix typically costs $45 to $85 per cylinder on a service visit. If you want a permanent fix, we replace the cylinder with a freeze-resistant unit, which runs $95 to $140.
Can you install a panic bar on a commercial door in Auburn that meets code?
Yes. We install code-compliant panic bars on Auburn commercial doors, including rim-type bars on single doors and vertical rod assemblies on double doors. On older buildings, we reinforce the stile so the bar holds properly. Installation runs $380 to $620 for a single door, and we verify latch function and release pressure before we leave. We also pull a permit when the job requires one.
Do you offer keypad entry or smart locks for Auburn commercial properties with multiple tenants?
Yes. We install keypad entry systems and smart locks for Auburn commercial properties where multiple tenants need different access levels: a shared front door that one tenant cannot easily rekey without locking everyone else out, individual office doors, and gates. A standard keypad deadbolt install runs $180 to $280. More complex access control systems for buildings with six or more tenants are scoped in writing with a flat per-lock price before any work begins. Call (910) 714-4287 and Perry Osgood or one of our technicians will walk you through the options that fit your building.
Written by Perry Osgood, Owner at Dunmore Locksmith, serving Auburn and the surrounding foothill communities since 2007.